ANSI Z87.1 Certification for Safety Eyeglasses
The American National Standards Institute (ANSI) is a non-governmental organization existing to regulate a multitude of companies on a global level. The overseeing institute was founded almost a century ago. Its prime objective is to guide companies on how to ensure quality safety standards at the workplace. The institute’s decree is intended to help workers, consumers and the environment in unison. More specifically, it also modulates the quality of Safety Eyeglasses worn during the job. Revision in the standard was made twice to ensure relevance to contemporary international regulatory standards.
The relevant standard for eye protection is the ANSI Z87.1. The very standard lays the premise in which the robustness of eyewear is encapsulated. This goes for branded Protective Eyewear as well. Every year for eyewear protection must conform to the standard by law. It helps employers to make better decisions for the safety of their employee's eyes. It has specific sections related to the eyes & face protection. It proves to be an influence in providing quality personal protective equipment. The standard delineates some of the most prevalent workplace hazards at work:
o Exposure to UV rays while working outdoors or in high temperatures.
o Flying projectiles of metal or any other hard material which could rupture the eye’s cornea.
o Fine particles of dust which could cause irritation in eyes.
Certification elevates the authenticity of protective eyeglasses during work. Tests conducted to ensure the right level of protection is offered to workers. These tests consist of a simulation of real-life accidents which could impair vision. One of the main dangers involve is the shattering of the lens due to a flying object towards the eye. High impact tests are conducted by throwing a metallic ball from a very short distance to test the endurance of the lens. If the lens breaks on impact, it is discarded. Another function ensured by ANSI compliance is the protection against UV rays. The material of the lens, which is made of Polycarbonate, helps with the act of reflecting away the rays. The gear must also help stave off any unwanted fluids. It must allow for ample protection around the sides, front & bottom of the glasses.
A sign of “+” following the Z87 must be etched on the Safety Eyeglasses lens to signify compliance. It denotes the glasses ability to withstand high-velocity object’s impact. The symbol represents the assurance of the right level of safety as prescribed by ANSI. Several other markings are also detailed by the standard, depending on the type of protection they offer. Where there is no marking except the letters Z87, it means only basic protection. Other important markings include “U” which means protection against UV rays. The symbols “D3” signify protection against spatter of toxic liquids. “D4” safeguards against fine particles of dust. Hence, various markings depend on the kind of protection. It is useful to ascertain the kind of hazards before purchasing the pertinent eyewear for safety.
Reducing Risk of Cataracts with 3M Safety Glasses
Eye injuries occur at varying degrees. These can be long or short term. Short term eye injuries require immediate medical care. They can be as a result of blunt trauma, lacerations, orbital fractures, etc. These can be catastrophic for your eyes of they are not tended with an adequate emergency. Be it work or play, protecting your eyes is crucial against both types of afflictions. A trustworthy brand as 3M Safety Glasses is the go-to option to prevent the occurrence of such injuries. Long term vision problems often manifest themselves at a later stage of a person’s life. They develop over a course of many years thus, proving much more harmful than short term ones. Among slow acting, hazards are Cataracts, which cause great damage to your vision. Humans often maintain a nonchalant attitude towards taking adequate measures to prevent long term ailments. Conversely, long term eye problems can be reduced greatly by adopting appropriate measures.
Workers are exposed to Ultraviolet rays every day at work, which is a major cause of cataracts. More often than not, humans aren’t aware of the harms it can bring to their vision. The prolonged vulnerability may not bring immediate symptoms of blurriness or vision loss. However, they can be reduced by using suitable protection for the eyes. A notable mention is 3M Safety Eyeglasses which offer the industry standard safety assurance against eye varying hazards (you can check them out on www.eyeweb.com). However, there are many factors which may contribute to the development of cataracts. This includes the aging process, smoking habits, diabetes, etc.
Cataracts is basically the clouding of the lens on the frontal portion of the eye. The lens of a healthy eye should bear a crystal clear vision. Crystalline lens, which rests behind the cornea, becomes blurry enough to completely block out our vision. Driving at night can be extremely dangerous with a blurry vision. Glare, caused by sunlight, is amplified due to the inability of the lens to focus on scattered light. In severe circumstances, surgery may be required. This is done by replacing the clouded lens with an encapsulated plastic lens implant. Hence, 3M Protective Eyewear can help with the prevention of cataracts. Protecting your eyes now will pay huge dividends in the future.
The simplest of the solution is to follow the adage of prevention is better than cure. You must not let your bare eyes be exposed to UV rays. Other than wearing safety equipment, safety against hazards must be assessed thoroughly to ensure their efficacy. The level of UV vulnerability varies from profession to profession. This must be accounted for when getting apparatus for eyewear protection. Small yet important things include maintaining ample distance from the source of radiation. Cataracts often prey on eyes which require correction. Apropos of this, 3M Prescription Safety Eyeglasses are the best solution as they offer protection with RX ready option on the table. Preventing long term injuries can be done with the right use of safety eyewear at the right time.
Safety Eyeglasses in construction
Protecting the eyes in a hazardous occupation such as construction is a no brainer. According to research conducted by The National Center for Biotechnology Information, more than one-fifth of eye-related accidents occur in the construction work. The dangerous nature of construction demands ample protection for workers to prevent accidents. The need for protection is encapsulated by the Occupational Safety and Health Administration in standard number 1910.133. Employers must analyze the perils posed by construction environment. This will help them to accurately prescribe the eyewear for laborers. By and large, the requirement is compulsory by law & Safety Eyeglasses must be worn during all working hours.
Most of the construction activity involves dealing with solid materials & toxic liquids. It includes activities such as site clearing, excavation, installing pipes, pouring semi-solid material in large quantities. A large number of particles in the air caused by the aforementioned activities are hazardous. Any work without safety gear must be strictly proscribed by employers. Injuries often prove to be far worse for companies than employees.
The very hazards can inflict damage to the worker’s eyes in numerous ways. The toxic liquid splashes are often common when dealing with barrels of liquid. They can also occur while pouring semi-concrete material which can impose permanent damage. When it comes to drilling or cutting concrete, residues can fly into the eyes. The use of Protective Eyewear is of importance here. Projectiles of residues are often high impact in form. Debris from heavy objects heaving onto the ground or carrying up is common as well. They can rupture the cornea of the eyes at any given moment. Small tools such as nails; screws; washers can also inadvertently damage the vision.
High temperatures are common in a construction milieu. Workers are exposed to long hours of radiation in the form of heat existing in both indoors and outdoors. Apart from skin, eyes can also be dearly affected by the harms of extreme heat. Long term vision ailments such as cataracts or macular degeneration are evident among old factory workers.
The premise of Safety Eyeglasses can never be discounted due to the very hazards. The OHSA’s requirements confer the rights of protective eyewear for workers. Not only the mandatory requirement should be satisfied, but the quality aspect should be too. Protection for eyes must be in a comfortable fit, offering assured resistance against the impact of high-velocity particles. The anti-scratching mechanism should exist as well. Scratches prevent accurate vision and can be a source of a hindrance for workers. To check this, attention must be paid to the coating of the lens. ANSI safety glasses standard Z87.1 ensures robustness of the protective eyewear. Workers must look for an etched mark of “+” engraved on the lens of glasses. Also, Polycarbonate lens wards off any UV ray exposure to the eyes. Hence, the significance of personal protective equipment for eyes cannot be forgone.
Safety Eyeglasses in Mining
Workers inside a mine are prone to fatal injuries. Hence, the need for Personal Protective Equipment (PPE) can never be emphasized enough in the case of mining. Among that includes eye protection, which is a must. Accidents can leave permanent damage to the body or eyes. Safety Eyeglasses are an essential item to prevent this from happening. Majority of the mining is regulated by the mandatory inclusion of protective eyewear. This is due to the high-impact danger involved in the course of workplace activity. Henceforth, It’s important to analyze the hazards associated with mining & the need for protection of eyes.
Safety Eyeglasses for mining should provide safeguard against a set of hazards. Some of these hazards include:
o Dangerous Projectiles – During drilling or masonry involved in mining, tiny particles of rocks can ricochet off the drilling apparatus. These can penetrate & destroy the cornea. Due to the constant grinding involved, the razor-sharp pieces of highly abrasive nature are often likely to damage the eyes. For this, protective gear can help to ward off any oncoming intrusive particles.
o Toxic Liquids – The inadvertent act of spilling dangerous chemicals while handling large barrels can be catastrophic. Toxic chemicals also pose a threat to eyes through acidic emanation of mists. This can cause irritation to the eyes. Small splashes of liquid in the eyes can be protected with eyewear. Protective Eyewear can be of help here. Also, the anti-fogging coating lens can offer clarity of vision with protection.
o UV Exposure – UltraViolet is emitted by the radiation, which is prevalent in high temperatures such as underground mining. A common gas is known as ‘Radon’ is a major cause of radiation for underground laborers. Prolonged exposure to UV rays can bring a number of harms. Ailments such as macular degeneration, cataracts often result in long-term vision loss.
o Extreme Heat – High degrees of temperature can often result in the burning of the eyelashes & eyebrows. Extreme temperatures can cause blurry vision & retinal detachment in the long run.
The use of protective gear for the eyes was made mandatory by OSHA (Occupational Safety and Health Administration). By wearing Prescription Safety Glasses, eye injuries can be easily reduced by almost 90%. Protecting the eyes at mining sites can be argued in favor by using the following benefits:
o Robustness – The material is sturdy & bulkier on the sides to offer protection against hazards. It acts as a bulwark against menacing flying residues & other objects. Most lenses are made of polycarbonate which helps against high-impact accidents. Its robustness is also defined in its high resistance to scratches & abrasion.
o Blocking UV Rays – The lenses made of polycarbonate help in warding off UV rays with almost 90% efficacy. This is of great benefit to the vision of the worker involved in long hours of underground exertion.
o Tinted lenses – The use of a photochromatic lens can be appropriately used to adjust enable vision pertaining to different levels of light.
Training at the Workplace for Safety Eyeglasses
Personal protective equipment (PPE) is the indispensable right of every worker. It is worth mentioning March which marks as the Workplace Eye Wellness month of the year. The need for ample eye protection training is imperative for the modern workplace. Experts unanimously agree that adoption of protective gear for the eyes could reduce injuries by almost 90%. According to the National Institute for Occupational Safety and Health (NIOSH), 2000 workers are subjected to injuries on the job each year. Most of the injuries sustained by workers are related to eyes. Another study conducted by the Bureau of Labor Statistics (BLS) testifies that 60 percent of injuries to eyes were as a result of not wearing Safety Glasses. Common injuries may include:
o Abrasion as a result of foreign objects entering and rupturing the eye’s cornea.
o Rubbing the eye as a result of irritation caused by the intrusion of fine particles such as dust.
o Splashes of liquid as a result of mishandling.
The aforementioned hazards can be avoided to a large extent through the implementation of a sound training program. This calls for a certain set of actions to be taken first. The Occupational Safety and Health Administration (OSHA) standards make it mandatory for employers to provide workers with a certain level of eye protection. This also includes prescription safety glasses for those having a refractive error in their vision. Before making your purchase, it is first important to ascertain a few things in order to educate & implement standards at work.
It’s important to assess the working milieu before purchasing Protective Eyewear. According to BLS, some workers are more prone to sustain injuries working in certain industries, which are:
Conducting a thorough analysis of business operations is quite fruitful. This will help in discerning the kinds of hazards workers face. It will also aid in purchasing the right kind of protective gear. Monthly data of accidents could be extracted and used as a source of information. The frequency of accidents can be detected.
After an assessment of the environment, it’s important to select the right kind of equipment. The American National Standards Institute (ANSI) compliance ascertains the level of protection for eyewear. The ANSI Z87 ensures the quality of robustness against high impact accidents. Various markings denote the kind of protection that is offered. For instance, “D3” mark is suitable against splatter of toxic fluids. For protection against Ultraviolet (UV) rays, glasses with a “U” marking should be chosen. They are suitable in case of workers involved in environments of extreme heat.
Employers should evangelize the need for wearing eye protection gear at work. According to a study, companies face a cost of $300 million dollars each year as a result of work-related injuries of employees. This could be reduced by a huge margin through safety training programs. Regular eye checkups should be conducted for employees requiring Safety Eyeglasses. It’s important for management to step up and support the needs of workers.
CONNECT WITH US BY EMAIL 24/7 AT SERVICE@3msafetyglasses․com. MOST RESPONSES WITHIN 60 MINUTES!