Anti-Fogging RX Safety Glasses
If you are in a fog (pun intended), it’s time to pay attention to an anti-fogging lens of your favorite goggles. The problem of fogging is pervasive in various forms of activities, depending on the type of environment. The condensation can occur during a crucial point during work. According to The National Institute for Occupational Safety and Health (NIOSH), 2000 eye injuries happen every day. These injuries include the ones owed to blurry vision caused by fogging on the lens. Another research carried out by the Occupational Safety & Health Standards surveyed workers who believed 28% of eye injuries are caused by fogged vision. Fogging is sometimes imminent at work, which must be dealt with by wearing appropriate eyewear. This can be done with either getting a suitable coating on the lens of your glasses or a new anti-fogging lens. Branded RX Safety Glasses provides its users with the option of getting an anti-fogging lens or a separate coating. In light of the aforementioned, this article bears an overview of under what conditions anti-fogging lens are suitable to wear.
The condensation essentially occurs due to the differences between the inner and outer surface of the lens. As cold air cannot hold moisture, it leaves tiny vapors on the lens in the form of fog. Fogging occurs in cold weather where there is a discrepancy between our body temperature & weather. This can also happen when we exert ourselves in physically demanding tasks. It causes our body temperature to rise & produce sweat, thus causing fogging on the lens. RX Safety Glasses are best suited for this when used with the anti-fogging lens. The aforementioned circumstances are quite common in the workplace. To get rid of blurry vision, laborers are forced to take off the glasses, remove the fog and wear them again. The idea of clearing the fog can be extremely cumbersome for workers. This can often lead to non-compliance, further aggravating the chances of incurring an injury. This also leads to a loss of productivity. This can be dealt with a few recommendations
There are a number of ways in which this problem can be approached. One is with the use of Anti-Fogging lens. Anti-fogging lenses have been very popular in terms of dealing with blurry vision effectively. For instance, Protective Eyewear from top brands provides you with a peripheral anti-fogging lens along with the option of vision correction. Some even come with polarized lenses. However, it’s important to note that all glasses must be ANSI 787.1 compliant. Along with the mechanism of preventing fog, they must also offer durability against high impact accidents. Another thing worth mentioning here is that there must be ample airflow around the lens. This allows the inner surface to adapt to outside warm temperature, allowing it to prevent misty lens. Another solution is to get the lens coated with anti-fogging material, which is effective in almost 99% of the cases.
Preventing long term UV impacts with RX Safety Glasses
Exposure to sunlight is essential. It provides us with all the ingredients we need to lead a healthy life. It protects us against inflammation, improves brain function & bestows other benefits to us. However, extended exposure to sunlight can be dangerous for your health. Evidence shows that 90 percent of skin cancer is caused by extended exposure to sunlight. This is essentially due to the Ultra Violet Rays (UV) present in sunlight. This article attempts to present a discourse on how long term hazards can be averted with RX Safety Glasses.
The UV rays form only the bottom 10% of the sunlight. Essentially the UV rays are in the form of electromagnetic radiation (ER). They are made up of different wavelengths & frequencies which determine their ability to penetrate through varying levels of earth’s atmosphere. The differences in the ER spectrum allows some rays to have shorter & others to have longer wavelengths. The longer wavelengths get filtered out by the earth’s stratosphere level (commonly known as the ozone layer). The two types of rays which are able to penetrate the earth’s atmosphere are UV-A & B. 3M Safety Glasses contain polycarbonate lens which is highly UV ray absorbent.
Expounding on the aforementioned, UV light is also emitted by the machines created by humans. Most hospitals use UV light to eliminate pathogens. Examples include dental curing light, tanning machines, etc. Long hours of exposure to artificial UV light can also lead to long term eye illnesses. UV-A type of light affects the frontal area of the eye, namely the crystalline lens. UV-B type of light permeates further up to the central region of the eye (macula) causing severe damage. This can lead to conditions such as cataracts, macular degeneration & even blindness. Cataracts cause clouding of the lens, leading to blindness. Likewise, Macular degeneration deprives a person to see details clearly in the long run. UV exposure can also lead to sunburn, commonly known as “Photokeratitis”. It can cause irritation, redness and even vision loss. This is even worrisome where people have a need for refractive correction. For this, 3M Prescription Safety Glasses combine vision correction along with the protective mechanism.
Much of the damage incurred during the earlier years do not appear until later in life. Increased frequency of exposure will lead to direr vision problems in the long run.
Taking possible measure to keep your vision intact is necessary. Investing in a good PPE such as 3M Protective Eyewear would pay dividends. All RX glasses guarantee 100% UV-A & B type absorption to prevent eye to host any long term illnesses. It is also necessary to protect against any foreign debris, projectiles or fine particles which may cause irreversible damage. RX eyewear complies with the ANSI Z787.1 standard, which offers UV protection. Always look out for a “U” marking etched on the lens to discern the level of protection offered by the lens.
RX Safety Glasses Vs Over the Glass Eyewear
OTG (Over the Glass) eyewear can be a popular choice among some people. It is when a person wears additional protection for eyes over their regular RX glasses. Conversely, this is different in the case of safety gear for eyes with vision correction. RX Safety Glasses embodies both functions in one protective gear. In any case, offering protection for your vision becomes the first priority naturally. According to The Vision Council, two thousand eye injuries occur each year. These injuries can be easily prevented by the use of protective eyewear by 90%. Hence, protecting your eyes at work is not to be compromised with. This article aims to draw a relevant comparison between both OTG & Safety Glasses.
These type of glasses are similar to regular protective goggles in terms of offering robust protection. They are also compliant with ANSI (American National Standards Institute) standard Z87.1. The very standard provides protection against high impact accidents. OTG possess the anti-fog lenses which help in removing the hassle of removing & cleaning eyewear repeatedly in cold temperatures. In contrast to Protective Eyewear, they can be worn over your own glasses and removed when not needed. They are a common apparatus of protection for industry workers who are cost conscious. It is often a choice for workers who have their own prescription glasses. The most obvious benefit of wearing additional protective eyewear is not putting all of your eggs in one basket. For instance, there often comes a time when the prescription lens of individual changes. This would be highly counterproductive with regular safety eyewear. Limitation arises when vision correction is combined with protection. It makes the gear unusable if the vision correction needs to change over time. Another point in favor of OTG gear is the option to be able to share it with other workers. They do not possess the inherent refractive error correction mechanism which makes them usable for almost everyone. In contrast, ANSI Safety Glasses offer the option of refractive correction which is beneficial in the long run. OTG proves to be a source of reducing cost in the short run for the employees & businesses.
Over-prescription glasses can reduce your cost in the short run but they can prove disadvantageous. The most pervasive complain from workers about them is the discomfort & clunky design. Long hours of wearing OTG can cause workers to remove them intermittently. This can cause accidents to occur during hours of not wearing any protective gear for workers. Prescription safety gear can also be a one-stop shop for an individual’s needs. In the long run, it reduces the actual cost of glasses per employee by combining both vision correction with safety. Most contemporary companies also pay special attention to the aesthetic department of safety eyewear. They ensure the wearers look good in them as well. Hence, most people can never go wrong with Prescription Safety Glasses.
The need for Bifocal RX safety glasses
At some point in our life, aging takes its toll on our eyes in an indispensable fashion. According to the American Academy of Ophthalmology, approximately 1.8 billion people in the world are affected by presbyopia. That’s almost one-quarter of the global population! This common refractive error, better known as farsightedness, often manifests in later part of our lives. One has come to terms with the fact that losing accuracy of vision is natural. As we age, we lose the elasticity of the eye’s lens which severely hampers our ability to focus on objects. The youthful elasticity of the lens helps our eyes to switch focus according to varying distances effortlessly. This deteriorates with age. Here, the use of bifocal RX safety glasses can play a huge role.
Essentially the lens consists of two lenses being assembled into a single one. Most bi-focal lenses come with some portion of itself to provide correction for near vision & the other or for far sight. There are also certain shapes of bi-focal lenses. One is the Flat-top or the straight top bi-focal lens which consists of the second lens having the upper border as a straight line. Round seg ones contain a circular border of the extra lens. The Franklin bi-focal lens shape consists of an equal surface area for either lens type (Near & Far). Bi-Focal lenses can also be integrated with safety eyewear frames.
The case for amalgamating the function of protection with vision is usually done in protective eyewear. They especially help workers whose vision is impaired and guard them against hazards at the workplace. They help in offering protection against flying foreign objects such as bits of metal or fine particles of dust. Also, modern safety gear for the eyes is standardized by the American National Standards Institute (ANSI). The compliance with Z87.1 since circa 2003 provides assurance against high impact accidents at work. The mechanism of guarding against UV (Ultra Violet) rays is also present in safety eyewear. The brunt of providing protective eyewear falls on the employer mostly. It is also incumbent upon them to conduct regular eye checkups for workers requiring prescription safety glasses. They must assure the actual type of hazards occurring at the workplace before actually buying the protective gear for eyes.
Thus, the need for bi-focal RX Safety Glasses cannot be discounted, especially in the case of workers. They not only perform the sole function of aiding in reading. Seeing with two lenses can greatly help laborers at the workplace as well. It removes the irksome idea of constantly adjusting the distance of the object to obtain better focus. It’s crucial for workers to seamlessly perform their task uninterruptedly. Frequent adjustments of the object’s distance can impede productivity. Bi-focal glasses are vaunted wear for some children & young individuals too. Hence, having two lenses can surely be of great help if they are integrated with safety glasses.
CONNECT WITH US BY EMAIL 24/7 AT SERVICE@3msafetyglasses․com. MOST RESPONSES WITHIN 60 MINUTES!